Induced fracture and fluid flow in tight oil reservoirs: Viscosity and temperature effects
PhDs and postgraduate research
Self-funded PhD students only
School of Earth and Environmental Sciences
Applications accepted all year round
This project is now closed. The details below are for information purposes only.
View our current projects here.
Applications are invited for a self-funded, 3 year full time PhD, to commence in October 2020 or February 2021.The PhD will be based in the School of Earth and Environmental Sciences and will be supervised by Dr. Philip Benson and Dr. Gianluca Tozzi.
The work will include:
- Applying a new method to simulate and produce hydraulic fracture in a well-controlled laboratory environment using triaxial rock deformation apparatus.
- Use the induced seismicity to understand the fracturing process, verified by post-text X-Ray computed tomography.
- Apply data to geotechnical stability models to scale up the laboratory-scale process to larger (simulated) rock masses.
The safe operation of unconventional oil reservoirs requires not only extensive knowledge of the tensile fracture mechanics of the mudrock, but also how permeable new fracture networks are to different types of fluid. In addition, elevated pore fluid pressure may have a detrimental effect on the rock mass stability via increased pore fluid pressure. To better understand these issues, this project will apply well-constrained laboratory rock physics tools to link measured permeability of freshly generated fracture networks to the fracture density and geometry across a range of fluids, and with reference to the microseismic response during initial fracture, which itself may be used as a proxy for damage and fracture zone properties.A unique laboratory setup will mimic the field geometry. Samples of 40mm diameter and 100mm length are encapsulated in a rubber jacket fitted with an 3D array for micro-acoustic sensors and instrumented for axial and radial strain. A central axial borehole will be pressurized within an outer shell of rock to simulate a range of depths to 4km by using high pressure hydraulics. This method has been validated by the iCASE NERC project NE/L009110/1. Fracture area and size will be derived from the spatio-temporal data, validated by post-test X-ray Computed Tomography. The measured fracture data (density and aperture) will be correlated with measured fracture permeability across a range of fluid viscosities and temperatures: impossible in the typical field scenario. This suite of laboratory permeability experiments will then be repeated to test how easily the faults are reactivated (or otherwise) as a function of pore pressure magnitude and ramp rate, and, extended to field conditions via engineering geotechnical stability models using MatLab and YADE.
The novelty of the project lies in the use of a new 3D printed ‘jacket’ which will allow the fluids flowing through the newly generated fracture set to be received and measured as a function of time, allowing the permeability of the fracture to be directly measured as a function of the above variables. This project will evaluate the permeability of the induced fractures as a function of the viscosity of the fluid using water and water/glycerine mixtures, and using low viscosity “slick water” often used in the initial stages of hydraulic fracture, but is poorly understood mechanically. Such data is of direct relevance to the unconventional hydrocarbon industry in order to produce resources responsibly and efficiently.
Fees and funding
Funding availability: Self-funded PhD students only.
PhD full-time and part-time courses are eligible for the UK Government Doctoral Loan (UK and EU students only).
2020/2021 entry (for October 2020 and February 2021 entries)
Home/EU/CI full-time students: £4,407 p/a
Home/EU/CI part-time students: £2,204 p/a
International full-time students: £16,400 p/a
International part-time students: £8,200 p/a
PhD by Publication
External candidates £4,407 p/a
Members of staff £1,680 p/a*
2021/2022 entry (for October 2021 and February 2022 entries)
PhD and MPhil
Home/EU/CI full-time students: £4,407 p/a*
Home/EU/CI part-time students: £2,204 p/a*
International full-time students: £17,600 p/a
International part-time students: £8,800 p/a
All fees are subject to annual increase.
PhD by Publication
External Candidates £4,407 p/a*
Members of Staff £1,720 p/a*
If you are an EU student starting a programme in 2021/22 please visit this page.
*This is the 2020/21 UK Research and Innovation (UKRI) maximum studentship fee; this fee will increase to the 2021/22 UKRI maximum studentship fee when UKRI announces this rate in Spring 2021.
Some PhD projects may include additional fees – known as bench fees – for equipment and other consumables, and these will be added to your standard tuition fee. Speak to the supervisory team during your interview about any additional fees you may have to pay. Please note, bench fees are not eligible for discounts and are non-refundable.
You'll need a good first degree in an applied science discipline from an internationally recognised university (minimum upper second class or equivalent, depending on your chosen course); an additional Master’s degree in a related area will be an advantage. In exceptional cases, we may consider equivalent professional experience and/or qualifications. English language proficiency at a minimum of IELTS band 6.5 with no component score below 6.0.
- Hold or expect to hold an good first degree (2:1 or higher) and/or a MSc. in Earth Sciences, Civil Engineering or a cognate discipline;
- Have a good working knowledge of numerical software such as excel and be familiar with basic numerical programming methods such as MatLab and Python;
- Have good social and team working skills.
- A working background in laboratory rock mechanics testing – or practical mechanical/electronic engineering skills – are beneficial but not strictly required as training will be provided.
How to apply
We’d strongly encourage you to contact Dr. Philip Benson (email@example.com) to discuss your interest before you apply, quoting the project code below.
When you are ready to apply, you can use our online application form and select ‘Geography, Earth and Environmental Sciences’ as the subject area. Make sure you submit a personal statement, proof of your degrees and grades, details of two referees, proof of your English language proficiency and an up-to-date CV. Our ‘How to Apply’ page offers further guidance on the PhD application process.When applying please quote project code: SEES4951019